Reset your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may require to reinitialize your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the settings or are experiencing unexpected behavior. Fortunately, resetting your Holosun is a simple process that can be completed in just a few steps.

• First ensuring your red dot sight is powered on.
• Identify the small reset button on the rear of the device.
• Employ a small object to press and hold the reset lever for approximately three seconds.
• Disengage the reset button and your Holosun EPS Carry Red Dot sight will power cycle.
• Your red dot sight should now be reverted to its factory settings.

Reset Your Holosun EPS Carry Red Dot to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to return to original, resetting it to its factory configuration is a breeze. First, determine the tiny button on the side of your optic. Then, keep pressed it for around twelve seconds until you see the red dot blink. Your Holosun EPS Carry is now reset to its factory settings, ready for accurate shooting.

Bring Your Holosun EPS Carry Back to : Functionality

Is your beloved Holosun EPS Carry experiencing some performance problems? Don't despair! A simple factory reset can often fix the problem and get your red dot sight back to its former glory. Before you begin, remember to remove the battery from your Holosun EPS Carry to prevent accidental activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these easy steps:

• Hold down the power button for approximately 10 seconds.
• An indicator will flash, indicating that the reset is in progress.
• Stop pressing the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can connect the battery and confirm your sight's functionality. If you encounter any further difficulties, don't hesitate to contactsupport team.

Restore Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Follow these steps carefully to ensure a successful factory reset.

• First, Activate your Holosun EPS Carry by pressing the power button.
• After that, press and hold both the mode button and the up/down adjustment button simultaneously.
• While continue holding these buttons, press the power button once.
• You will show a confirmation prompt indicating that the reset process is initiated.
• Permit the process to complete. This may take a few moments. Once done, your Holosun EPS Carry will automatically shutdown.

After resetting your Holosun EPS Carry to factory settings, you check here will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Erase All Settings on Your Holosun EPS Carry

To Original reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Holding a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Reset All". Select this option and confirm the reset. Your sight will then power off and restart with all settings Restored to their default values.

Reset your Holosun EPS Carry via a Factory Standard Settings

If your Holosun EPS Carry is acting funny, a factory reset might be the solution. This will restore your sight to its initial settings, clearing any custom configurations you've made. To execute this reset, adhere to these simple steps:

• Initially, find the reset lever on your EPS Carry.
• Then, engage a fine object, like a paperclip, to push the reset lever.
• While hold the reset switch activated, turn your EPS Carry.
• It will flash a message confirming that the reset is finished.

After the reset is successful, your EPS Carry will be back to its factory settings.

Report this wiki page